init commитььиьа

module/action.sh

@@ -0,0 +1,40 @@
+#!/system/bin/sh
+LOG=/data/adb/euicc_daemon.log
+ESIM_SVC="vendor.oplus.hardware.esim.IOplusEsim/default"
+
+gpio_st() {
+    service call "$ESIM_SVC" 1 2>/dev/null | grep -oE '[0-9a-f]{8} [0-9a-f]{8}' | head -1 | awk '{print $2}'
+}
+
+status() {
+    G=$(gpio_st)
+    D=$(dumpsys isub 2>/dev/null | grep -c 'simSlotIndex=1 portIndex=0 isEmbedded=1')
+    N=$(dumpsys isub 2>/dev/null | grep 'simSlotIndex=1 ' | grep -oE 'displayName=[^ ]+' | head -1)
+    if [ "$G" = "00000001" ]; then
+        echo "eUICC power : ON"
+    else
+        echo "eUICC power : OFF ($G)"
+    fi
+    if [ "${D:-0}" -ge 1 ]; then
+        echo "eSIM in slot: YES  $N"
+    else
+        echo "eSIM in slot: NO"
+    fi
+}
+
+echo "=== eSIM Fix ==="
+status
+echo
+echo "Running activation cycle (~1-2 min)..."
+echo
+sh /data/adb/modules/euicc_slots_fix/esimd-manual.sh
+echo
+echo "=== Result ==="
+status
+echo
+echo "Log:"
+tail -8 "$LOG" 2>/dev/null
+
+if [[ -z "$MMRL" ]] && ([[ -n "$KSU" ]] || [[ -n "$APATCH" ]]); then
+    sleep 10
+fi

module/customize.sh

@@ -0,0 +1,12 @@
+ui_print "- eSIM Slots Fix v1.1"
+ui_print "- by huker667"
+ui_print "- OnePlus 15R (macan), LineageOS-based Android 16"
+
+set_perm_recursive "$MODPATH" 0 0 0755 0644
+set_perm "$MODPATH/post-fs-data.sh" 0 0 0755
+set_perm "$MODPATH/service.sh" 0 0 0755
+set_perm "$MODPATH/action.sh" 0 0 0755
+set_perm "$MODPATH/esimd.sh" 0 0 0755
+set_perm "$MODPATH/esimd-manual.sh" 0 0 0755
+
+ui_print "- Done. Reboot to activate."

module/esimd-manual.sh

@@ -0,0 +1,57 @@
+#!/system/bin/sh
+ESIM_SVC="vendor.oplus.hardware.esim.IOplusEsim/default"
+SUB_SVC="vendor.oplus.hardware.subsys_interface.subsys_radio.ISubsysRadio/slot1"
+LOG=/data/adb/euicc_daemon.log
+M1="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 1"
+M2="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 2"
+
+log() {
+    echo "$(date '+%F %T') [manual] $*" >> "$LOG"
+    echo "$*"
+}
+
+gpio_state() {
+    service call "$ESIM_SVC" 1 2>/dev/null | grep -oE '[0-9a-f]{8} [0-9a-f]{8}' | head -1 | awk '{print $2}'
+}
+
+detected() {
+    dumpsys isub 2>/dev/null | grep -c 'simSlotIndex=1 portIndex=0 isEmbedded=1'
+}
+
+log "=== manual cycle start ==="
+
+service call "$ESIM_SVC" 5 i32 0 >/dev/null 2>&1
+service call "$SUB_SVC" 289 i32 91 i32 1 >/dev/null 2>&1
+service call "$ESIM_SVC" 3 i32 1 >/dev/null 2>&1
+service call "$ESIM_SVC" 5 i32 1 >/dev/null 2>&1
+sleep 1
+log "gpio=$(gpio_state)"
+
+logcat -c -b radio 2>/dev/null
+service call phone 175 $M1 >/dev/null 2>&1
+sleep 2
+log "SET_SIM_TYPE[1,1] sent, restarting qcrild..."
+setprop ctl.restart vendor.qcrild
+setprop ctl.restart vendor.qcrild2
+t=0
+while [ $t -lt 40 ]; do
+    n=$(logcat -d -b radio 2>/dev/null | grep -c "Received GET_SIM_TYPE_INFO")
+    [ "${n:-0}" -ge 1 ] 2>/dev/null && break
+    sleep 1
+    t=$((t+1))
+done
+log "ril sync after ${t}s"
+service call phone 175 $M2 >/dev/null 2>&1
+log "SET_SIM_TYPE[1,2] sent, waiting for eSIM detection..."
+
+p=0
+while [ $p -lt 15 ]; do
+    sleep 3
+    p=$((p+1))
+    d=$(detected)
+    [ "${d:-0}" -ge 1 ] 2>/dev/null && break
+done
+log "=== manual cycle done: detect=$(detected) ($((p * 3))s) ==="
+
+pgrep -f esimd.sh >/dev/null 2>&1 || setsid /system/bin/sh /data/adb/modules/euicc_slots_fix/esimd.sh >/dev/null 2>&1 </dev/null &
+exit 0

module/esimd.sh

@@ -0,0 +1,132 @@
+#!/system/bin/sh
+ESIM_SVC="vendor.oplus.hardware.esim.IOplusEsim/default"
+SUB_SVC="vendor.oplus.hardware.subsys_interface.subsys_radio.ISubsysRadio/slot1"
+LOG=/data/adb/euicc_daemon.log
+M1="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 1"
+M2="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 2"
+
+log() { echo "$(date '+%F %T') $*" >> "$LOG"; }
+
+if [ -f "$LOG" ] && [ "$(wc -c < "$LOG" 2>/dev/null)" -gt 262144 ]; then
+    tail -c 65536 "$LOG" > "$LOG.tmp" && mv "$LOG.tmp" "$LOG"
+fi
+
+gpio_state() {
+    service call "$ESIM_SVC" 1 2>/dev/null | grep -oE '[0-9a-f]{8} [0-9a-f]{8}' | head -1 | awk '{print $2}'
+}
+
+gpio_on() {
+    service call "$ESIM_SVC" 5 i32 0 >/dev/null 2>&1
+    service call "$SUB_SVC" 289 i32 91 i32 1 >/dev/null 2>&1
+    service call "$ESIM_SVC" 3 i32 1 >/dev/null 2>&1
+    service call "$ESIM_SVC" 5 i32 1 >/dev/null 2>&1
+}
+
+esim_detected() {
+    dumpsys isub 2>/dev/null | grep -c 'simSlotIndex=1 portIndex=0 isEmbedded=1'
+}
+
+card_up() {
+    logcat -d -b radio 2>/dev/null | grep -cF "[1] recv card status:3"
+}
+
+echo $$ > /data/adb/esimd.pid
+log "=== esimd started pid=$$ ==="
+
+i=0
+while [ $i -lt 600 ]; do
+    service check "$ESIM_SVC" 2>/dev/null | grep -q ': found' && break
+    sleep 0.5
+    i=$((i+1))
+done
+log "phaseA: esim HAL ready after ~$((i/2))s"
+
+G=$(gpio_state)
+if [ "$G" != "00000001" ]; then
+    j=0
+    while [ $j -lt 10 ]; do
+        gpio_on
+        sleep 1
+        G=$(gpio_state)
+        [ "$G" = "00000001" ] && break
+        j=$((j+1))
+    done
+    log "phaseA: gpio powered, state=$G tries=$((j+1))"
+else
+    log "phaseA: gpio already ON"
+fi
+
+i=0
+while [ $i -lt 300 ]; do
+    service check phone 2>/dev/null | grep -q ': found' && break
+    sleep 1
+    i=$((i+1))
+done
+log "phaseB: phone service after ~${i}s"
+
+w=0
+while [ $w -lt 60 ]; do
+    [ "$(esim_detected)" -ge 1 ] 2>/dev/null && break
+    sleep 3
+    w=$((w+3))
+done
+
+attempt=0
+while [ $attempt -lt 6 ]; do
+    D=$(esim_detected)
+    if [ "${D:-0}" -ge 1 ] 2>/dev/null; then
+        log "phaseB: eSIM UP (attempt $attempt, detect=$D card=$(card_up))"
+        break
+    fi
+    attempt=$((attempt+1))
+    log "phaseB: attempt $attempt (detect=$D card=$(card_up))"
+
+    G=$(gpio_state)
+    if [ "$G" != "00000001" ]; then
+        gpio_on
+        sleep 1
+    fi
+
+    logcat -c -b radio 2>/dev/null
+    service call phone 175 $M1 >/dev/null 2>&1
+    sleep 2
+    setprop ctl.restart vendor.qcrild
+    setprop ctl.restart vendor.qcrild2
+    t=0
+    while [ $t -lt 40 ]; do
+        n=$(logcat -d -b radio 2>/dev/null | grep -c "Received GET_SIM_TYPE_INFO")
+        [ "${n:-0}" -ge 1 ] 2>/dev/null && break
+        sleep 1
+        t=$((t+1))
+    done
+    service call phone 175 $M2 >/dev/null 2>&1
+    p=0
+    while [ $p -lt 12 ]; do
+        sleep 3
+        p=$((p+1))
+        [ "$(card_up)" -ge 1 ] 2>/dev/null && break
+    done
+done
+log "phaseB: done, detect=$(esim_detected) card=$(card_up)"
+
+fails=0
+while true; do
+    sleep 30
+    if [ "$(esim_detected)" -ge 1 ] 2>/dev/null; then
+        fails=0
+    else
+        fails=$((fails+1))
+        log "monitor: eSIM not detected (fails=$fails)"
+        if [ $fails -ge 2 ]; then
+            log "monitor: reactivating"
+            gpio_on
+            sleep 1
+            service call phone 175 $M1 >/dev/null 2>&1
+            sleep 2
+            setprop ctl.restart vendor.qcrild
+            sleep 10
+            service call phone 175 $M2 >/dev/null 2>&1
+            fails=0
+        fi
+    fi
+done

module/module.prop

@@ -0,0 +1,6 @@
+id=euicc_slots_fix
+name=eSIM Slots Fix
+version=v1.1
+versionCode=2
+author=huker667
+description=Full eSIM support for OnePlus 15R (macan) on LineageOS-based Android 16 ports. RRO for eUICC slot visibility, early boot activation daemon with auto-recovery, manual activation action button.

module/post-fs-data.sh

@@ -0,0 +1,37 @@
+#!/system/bin/sh
+MODDIR=${0%/*}
+
+TMP=/dev/euicc_overlay_tmp
+SRC=/product/overlay
+if [ -f "$MODDIR/product/overlay/EuiccSlotsFix.apk" ]; then
+    rm -rf "$TMP" 2>/dev/null
+    mkdir -p "$TMP"
+    cp -a "$SRC/." "$TMP/" 2>/dev/null
+    cp -a "$MODDIR/product/overlay/EuiccSlotsFix.apk" "$TMP/" 2>/dev/null
+    mount -t tmpfs -o mode=755 tmpfs "$SRC"
+    cp -a "$TMP/." "$SRC/" 2>/dev/null
+    chown -R root:root "$SRC"
+    chmod 755 "$SRC"
+    restorecon -R "$SRC" 2>/dev/null
+    rm -rf "$TMP"
+fi
+
+PTMP=/dev/perm_tmp
+PERM=/product/etc/permissions
+if [ -f "$MODDIR/product/etc/permissions/android.hardware.telephony.satellite.xml" ]; then
+    rm -rf "$PTMP" 2>/dev/null
+    mkdir -p "$PTMP"
+    cp -a "$PERM/." "$PTMP/" 2>/dev/null
+    cp -a "$MODDIR/product/etc/permissions/android.hardware.telephony.satellite.xml" "$PTMP/" 2>/dev/null
+    mount -t tmpfs -o mode=755 tmpfs "$PERM"
+    cp -a "$PTMP/." "$PERM/" 2>/dev/null
+    chown -R root:root "$PERM"
+    chmod 755 "$PERM"
+    chmod 644 "$PERM"/*.xml 2>/dev/null
+    restorecon -R "$PERM" 2>/dev/null
+    rm -rf "$PTMP"
+fi
+
+/data/adb/ksu/bin/resetprop ro.surface_flinger.set_idle_timer_ms 3000
+
+setsid /system/bin/sh "$MODDIR/esimd.sh" >/dev/null 2>&1 </dev/null &

module/product/etc/permissions/android.hardware.telephony.satellite.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<permissions>
+    <feature name="android.hardware.telephony.satellite" />
+</permissions>

module/service.sh

@@ -0,0 +1,10 @@
+#!/system/bin/sh
+until [ "$(getprop sys.boot_completed)" = "1" ]; do sleep 2; done
+sleep 5
+while true; do
+    if ! pgrep -f esimd.sh >/dev/null 2>&1; then
+        echo "$(date) esimd not running, respawning" >> /data/adb/euicc_daemon.log
+        setsid /system/bin/sh /data/adb/modules/euicc_slots_fix/esimd.sh >/dev/null 2>&1 </dev/null &
+    fi
+    sleep 20
+done