init commитььиьа

module/esimd.sh

@@ -0,0 +1,132 @@
+#!/system/bin/sh
+ESIM_SVC="vendor.oplus.hardware.esim.IOplusEsim/default"
+SUB_SVC="vendor.oplus.hardware.subsys_interface.subsys_radio.ISubsysRadio/slot1"
+LOG=/data/adb/euicc_daemon.log
+M1="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 1"
+M2="i32 2 i32 1 i32 0 i32 0 i32 0 i32 1 i32 1 i32 0 i32 1 i32 1 i32 2"
+
+log() { echo "$(date '+%F %T') $*" >> "$LOG"; }
+
+if [ -f "$LOG" ] && [ "$(wc -c < "$LOG" 2>/dev/null)" -gt 262144 ]; then
+    tail -c 65536 "$LOG" > "$LOG.tmp" && mv "$LOG.tmp" "$LOG"
+fi
+
+gpio_state() {
+    service call "$ESIM_SVC" 1 2>/dev/null | grep -oE '[0-9a-f]{8} [0-9a-f]{8}' | head -1 | awk '{print $2}'
+}
+
+gpio_on() {
+    service call "$ESIM_SVC" 5 i32 0 >/dev/null 2>&1
+    service call "$SUB_SVC" 289 i32 91 i32 1 >/dev/null 2>&1
+    service call "$ESIM_SVC" 3 i32 1 >/dev/null 2>&1
+    service call "$ESIM_SVC" 5 i32 1 >/dev/null 2>&1
+}
+
+esim_detected() {
+    dumpsys isub 2>/dev/null | grep -c 'simSlotIndex=1 portIndex=0 isEmbedded=1'
+}
+
+card_up() {
+    logcat -d -b radio 2>/dev/null | grep -cF "[1] recv card status:3"
+}
+
+echo $$ > /data/adb/esimd.pid
+log "=== esimd started pid=$$ ==="
+
+i=0
+while [ $i -lt 600 ]; do
+    service check "$ESIM_SVC" 2>/dev/null | grep -q ': found' && break
+    sleep 0.5
+    i=$((i+1))
+done
+log "phaseA: esim HAL ready after ~$((i/2))s"
+
+G=$(gpio_state)
+if [ "$G" != "00000001" ]; then
+    j=0
+    while [ $j -lt 10 ]; do
+        gpio_on
+        sleep 1
+        G=$(gpio_state)
+        [ "$G" = "00000001" ] && break
+        j=$((j+1))
+    done
+    log "phaseA: gpio powered, state=$G tries=$((j+1))"
+else
+    log "phaseA: gpio already ON"
+fi
+
+i=0
+while [ $i -lt 300 ]; do
+    service check phone 2>/dev/null | grep -q ': found' && break
+    sleep 1
+    i=$((i+1))
+done
+log "phaseB: phone service after ~${i}s"
+
+w=0
+while [ $w -lt 60 ]; do
+    [ "$(esim_detected)" -ge 1 ] 2>/dev/null && break
+    sleep 3
+    w=$((w+3))
+done
+
+attempt=0
+while [ $attempt -lt 6 ]; do
+    D=$(esim_detected)
+    if [ "${D:-0}" -ge 1 ] 2>/dev/null; then
+        log "phaseB: eSIM UP (attempt $attempt, detect=$D card=$(card_up))"
+        break
+    fi
+    attempt=$((attempt+1))
+    log "phaseB: attempt $attempt (detect=$D card=$(card_up))"
+
+    G=$(gpio_state)
+    if [ "$G" != "00000001" ]; then
+        gpio_on
+        sleep 1
+    fi
+
+    logcat -c -b radio 2>/dev/null
+    service call phone 175 $M1 >/dev/null 2>&1
+    sleep 2
+    setprop ctl.restart vendor.qcrild
+    setprop ctl.restart vendor.qcrild2
+    t=0
+    while [ $t -lt 40 ]; do
+        n=$(logcat -d -b radio 2>/dev/null | grep -c "Received GET_SIM_TYPE_INFO")
+        [ "${n:-0}" -ge 1 ] 2>/dev/null && break
+        sleep 1
+        t=$((t+1))
+    done
+    service call phone 175 $M2 >/dev/null 2>&1
+    p=0
+    while [ $p -lt 12 ]; do
+        sleep 3
+        p=$((p+1))
+        [ "$(card_up)" -ge 1 ] 2>/dev/null && break
+    done
+done
+log "phaseB: done, detect=$(esim_detected) card=$(card_up)"
+
+fails=0
+while true; do
+    sleep 30
+    if [ "$(esim_detected)" -ge 1 ] 2>/dev/null; then
+        fails=0
+    else
+        fails=$((fails+1))
+        log "monitor: eSIM not detected (fails=$fails)"
+        if [ $fails -ge 2 ]; then
+            log "monitor: reactivating"
+            gpio_on
+            sleep 1
+            service call phone 175 $M1 >/dev/null 2>&1
+            sleep 2
+            setprop ctl.restart vendor.qcrild
+            sleep 10
+            service call phone 175 $M2 >/dev/null 2>&1
+            fails=0
+        fi
+    fi
+done